[Furniture]
Handmade jarrah and marri furniture, on the gallery floor.
I make furniture in jarrah and marri, and in blackbutt, sheoak or tuart when a piece calls for it, at my workshop on Blythe Road in Yallingup, in the Margaret River region. Dining tables, desks, cabinets and chests of drawers, built one at a time.
Every piece is finished here and signed with an inlaid gum leaf. Some are on the gallery floor, ready to take home. Most of what I make is commissioned, in the timber you choose.
Signature pieces: the Cone Table, Parallel Universe Table and Pyramid Desk
3 piecesThe designs the workshop is known for. The Cone Table was first drawn in the early 1980s and only seven originals exist. The Pyramid Desk is tailored to the room it goes into, so no two are the same.
Jarrah and marri dining tables
2 piecesA long marri table on a single laminated arch and a jarrah round table on one pedestal. More tables, sizes, prices and how a commissioned table is made are on the dining tables page.
Jarrah cabinets, consoles and sideboards
3 piecesDrawers cut and fitted by hand, dovetailed in the tall chest, with woven cane where a piece needs to breathe in the southwest climate.
From the gallery floor
Pieces that have come through the workshop over the years. Some have already sold; others are still here. Visit the gallery to see what's on the floor today, or commission similar work in your own timber.

The Parallel Universe

Marri Cone, Coastal Home

Live-Edge Dining Slab

Burl Chest of Drawers

Sculpted Trestle Dining

Pyramid-Pedestal Dining

Marri Live-Edge Dining

Live-Edge & Leather

Twin-Pillar Dining + Sideboard

Trestle Dining Table

Twin-Pedestal Dining

Tall Curved Burl Chest

Red Curved Sideboard

Red Burl Sideboard

Slim Jarrah Hall Console

Curved Jarrah Writing Desk

Curved Hall Table

High-Back Dining Chairs

Sunburst Round Pedestal

Square Pedestal Dining

The Gum-Leaf Signature
John's hand-carved gum leaf — inlaid into every piece

Two Arched Dining Tables
Signature curved-arch trestles, side by side on the gallery floor

Live-Edge Jarrah Slab
Resin inlay, pedestal base — beside a Peter Lik–style print

Cone in Progress
In the spray booth — sculptural base, cantilevered top
[Where to see and buy]
Where can I see the furniture and buy it?
In the gallery at 105 Blythe Road, Yallingup Siding WA 6282. Open every day, 10am to 4pm. After-hours visits by arrangement for special requests.You can sit at the tables, open the drawers, look at the joinery underneath and ask anything. The pieces in the room came out of the workshop next door, and I'm in there most days, through the viewing window.
Pam runs the gallery floor and knows every piece in it. She'll usually have worked out what you're after before I've put my tools down. If it isn't on the floor, it can be commissioned, and the visit page has directions.
Buying jarrah anywhere? Ask the maker five things.
- Where did the timber come from? A real maker knows the mill, the salvage source, sometimes the tree.
- How was it dried? Air-dried first, then finished in a kiln, is the answer you want. Kiln-only from green is a warning.
- What's the finish? Oil, hard wax oil and polyurethane all have trade-offs. The maker should know exactly which one is on the piece.
- How is the top fixed to the base? Sliding battens, slot-fixings or buttons are good answers. Screwed down hard, a solid top will crack.
- Is there a maker's mark? Most makers who care sign their work. Mine is a gum leaf.
More on the timbers themselves: five WA hardwoods every furniture buyer should know, and how to look after them.
Buying it as a gift
A table or a chest of drawers given for a wedding, an anniversary or a retirement is still in the house thirty years on. A commission takes months, so when the date is close, a finished piece from the gallery floor is the honest answer. The commissions page covers how to give a commission as a gift.







